Usually the manufacturer states the minimum distance from the main unit to the button is no more than 100 m: however, in reality this parameter may be less – therefore, before installation, it is worth determining the area of confident signal reception.
Wir bell
The principle of operation is nicaragua email list 220333 contact leads elementary:
the sound is heard when you press the bell button. The implement circuit is similar to connecting a regular switch and a light bulb. Only instead of them, you ne to connect a button and a sound block.
How to hang these elements on the wall? Algorithm of actions for mounting the doorbell and button:
Determine the location for installation of system elements;
turn off the circuit breakers or fuses; It is consider
drill a hole in the wall for electrical wiring to connect the circuit elements;
make a groove from the hole made to the point design for mounting the button, or lay cable channels along this route;
Fix all the doorbell components to the video usage will continue to grow wall and remove
the cover to gain access to the contacts;
take a probe indicator and determine where the “phase” is and where the “zero” is: connect the first one in series to the button (through the “gap”), and connect the second one directly to the terminal of the bell unit: it is recommend to do this through a distribution box;
It is consider if there is grounding, connect
The corresponding contact locat in the bell housing (for example, in the housing of the elkom product there are self-clamping terminals, which greatly simplifies installation);
Turn on the circuit breaker on the panel fax list and check the functionality of the device.
The photo shows that it is best to install the bell at a distance of 1.5 m from the floor.
There is a small nuance: if you want no one to disturb you at a certain time, put a regular switch in the “path” of the wire from the bell to the main unit.